Sai Enterprises
Sai Enterprises
Peenya, Bengaluru, Karnataka
GST No. 29AHRPA5654N1ZN
Send E-mail
Call 0804885801167% Response Rate
Home  » Our Products » 

AC CONTROLLER


Providing you the best range of 2 ac timer digital, ac timer (2 ac) dip, 4ac controller model: tt-4, 2 ac controller with gsm, 2 ac controller model: tt-2 and 3 ac controller model: tt-3 with effective & timely delivery.

REQUEST CALLBACK
Get Best Quote

Approx. Rs 6,000 / Piece Get Latest Price

Product Brochure
Product Details:
System Supply230 VAC +/- 15%
Output Contact RatingOutput contact rating for AC 25 A at 230 VAC
Power On Delay Time1 minutes
Restart Delay Time3 minutes
Trip Time Delay3 sec for UV OV, 5 sec. OL 5 minutes for UL
Over VoltageDefault 260 V .User settable by Keys. 10 V hysteresis between Cutoff Cut in. Auto reset
Under VoltageDefault 180 V User settable by keys. 10 V hysteresis. Auto reset.
Over LoadDefault 15 A. User settable by keys.
Under LoadDefault 3 A user settable. Make it 0 A to bypass UL protection
Cycle Time240 min.

Technical Specifications:
Indications1) Healthy: Indicates controller is working healthy.
2) ALARM: when this LED glows it indicates presence fault.
3) AC ON: when this LED glows it shows AC is ON


Yes! I am Interested


REQUEST CALLBACK
Get Best Quote

Approx. Rs 4,000 / Piece Get Latest Price

Product Brochure
Product Details:
Input Supply230VAC +/- 15 %, 50Hz. Output: 230V, 25 Amp. Separate for 2 A/Cs.
ProtectionsOver voltage (OV): Cutoff 270 V Cut in 260 V Under voltage (UV): Cutoff 160 V Cut in 170 V
OP ContactsO/P contact for both A/C 2
IndicationsA/C1 ON, A/C2 ON, ON Delay, Over voltage (OV) trip, Under voltage (UV) Trip, Manual Mode, Auto Mode.
ON Delay Time2 minute 30 sec
Change over Time Delay4/8 Hr ( site selectable switch)
OP Contacts Rating30 amps At 230 VAC
Dimension85(W) X 190 (L)
MountingWall Mounting

Other Details:
Working1. If Auto/Man switch is in Auto mode Test/Timer switch is in Timer position then each A/C runs for Hrs. which is selected by user.
2. If Auto/Man switch is in Auto mode Test/Timer switch is in Test position then both A/C runs for Hrs. which is selected by user.
3. If Auto/Man switch is in Manual mode then A/C will be ON which is selected by third DIP switch. It will be continuously ON.




Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)

Yes! I am Interested


REQUEST CALLBACK
Get Best Quote

Approx. Rs 18,500 / Piece Get Latest Price

Product Brochure
Product Details:
Current30 Amps.
BrandProton
MaterialMS POWDER COATING
Dimension330mm(W) X 220 mm (H) X 80 mm (O)
Display TypeLCD
Power SupplySingle phase 230 VAC, 50 Hz.
Usage/ApplicationAC COOLER

4AC Controller MODEL: TT-4

MICROCONTROLLERS with their inherent advantages are being increasingly used in the industry. With growing shortage and escalating cost of Electrical Energy, accurate monitoring of Air Conditioner's parameters has become necessary. '4 A/C CONTROLLER is most useful for controlling A/Cs. This instrument is able to maintain Room Temperature with an accuracy of 0.1 Degree Celsius by automatic measurement of Room temperature and accordingly controlling A/C ON/OFF.It also protects Costly Air conditioner from Unhealthy condition's such as over load/under load etc. by automatically cutting off supply to it.



Additional Information:
  • Delivery Time: 2-3 WEEKS

Yes! I am Interested


REQUEST CALLBACK
Get Best Quote

Approx. Rs 18,000 / Piece Get Latest Price

Product Brochure
Product Details:
Supply415 VAC(R, Y, B, N), 50Hz
Display16*2 LCD Display for status Faults.
Input3 Phase 415 VAC, 50 Hz (R, Y, B N) (No auxiliary supply).
Output40Amp 3 pole contactor for each A/C (230VAC) for ALARM contact.
Alarm OP2 Nos. Alarm contacts @ 7Amp A/C.
SensorNTC Temp sensor for room Temp.(Range 0 - 55 deg C)
Terminals1] Separate O/Ps for each AC. 2] Temperature sensor. 3] Alarms relay o/p.

Technical Specifications:
Indications1) Healthy indication for controller.
2) A/C ON indication for each A/C.
3) Alarm indication 2 nos: AC Alarm, Fire Alarm.
Front Panel1] 16 char. 2 lines LCD display with backlight.
2] 4 Key keypad for programming.
3] A/C1 ON indication.
4] A/C2 ON indication.
5] Healthy Indication by blinking Green LED.
6] ALARM indication by Red LED.
Sensing1] Inbuilt voltage sensing for Relay.
2] Inbuilt Currant sensing for Relay.
3] Temperature sensing by precise Temp. Sensor.


Alarms/ Protections1] Over voltage protection set point user settable.
2] Under voltage protection set point user settable.
3] SPP voltage protection with disable allows.
4] Unbalance voltage protection set point user settable with disable allow.
5] RP voltage protection with disable allows.
6] Over Load protection set point user settable.
7] Under Load protection set point user settable.
8] Load Unbalance protection set point user settable with disable allows.
9] High/low temperature alarm set point user settable.

Yes! I am Interested


REQUEST CALLBACK
Get Best Quote

Approx. Rs 13,000 / Piece Get Latest Price

Product Brochure
Product Details:
SupplySingle phase 230 VAC, 50 Hz.
Display16 X 2 LCD Display for Status Faults.
Output30 Amps. At 250 V AC for A/C Contacts,
Alarm OP2 Nos. Alarm contacts @ 7A 250V AC
SensorNTC Temp. Sensor for room temp (Range 0 - 55 deg C)
Fire AlarmFire Alarm input from Fire Panel
Indications1) Healthy indication for controller. 2) A/C ON indication for each A/C. 3) Alarm indication 2 no's
Dimensions330 (W) X 220 (H) X 80 (D)

We are offering 2 AC Controller MODEL: TT-2 to our clients.

Yes! I am Interested


REQUEST CALLBACK
Get Best Quote

Approx. Rs 16,000 / Piece Get Latest Price

Product Brochure
Product Details:
SupplySingle phase 230 VAC, 50 Hz.
Display16 X 2 LCD Display for status Faults.
Output30 Amps. At 250 V AC for A/C Contacts,
Alarm OP2 Nos. Alarm contacts @ 7A 250V AC
SensorNTC Temp. Sensor for room temp ( Range 0 - 55 deg C)
Fire AlarmFire Alarm input from Fire Panel
Dimension330 mm (W) X 220 mm (H) 80 mm (O)

Technical Specifications:
Indications1) Healthy indication for controller.
2) A/C ON indication for each A/C.
3) Alarm indication 2 nos: AC Alarm, Fire Alarm.
Front Panel1) 16 char X 2 lines LCD display with backlight.
2) Key keypad for programming.
3) A/C1 ON indication.
4) A/C2 ON indication.
5) A/C3 ON indication.
6) Healthy Indication by blinking Green LED.
7) ALARM indication by Red LED.
8) FUN,INC,DEC,ENT keys for parameter setting.
Sensing1) Inbuilt Voltage sensing for compressor.
2) Temperature sensing by precise Temp. Sensor.
3) Fire Alarm sensing.
Terminals1) Separate O/Ps for each Compressor.
2) Temperature sensor.
3) Alarm relay o/p.
Alarms/ Protections1) Over Voltage protection set point user settable
2) Under Voltage protection set point user settable.
3) High/low temperature alarm set point user settable.

Yes! I am Interested


Get Best Quote

Approx. Rs 24,000 / Piece Get Latest Price

Product Brochure
Product Details:
BrandProton
SupplySingle phase 230 VAC, 50 Hz
Display16 x 2 LCD Display for Status Faults.
InputMCB TPN 32Amp, 10KA capacity.
Alarm OP5 Nos. Alarm contacts @ 7 Amp 250VAC.
Output30 Amp single pole contactor for each A/C (230 V AC)
SensorNTC Temp sensor 1 No for room temp. (Range 0 - 55 deg C)
Fire InputFire alarm input from fire panel
Dimensions330mm(W) X 220 mm (H) X 80 mm (O)
Indications1) Healthy indication for controller. 2) A/C ON indication for Each A/C. 3) Alarm indications 5 Nos.
MountingWall Mounting

Technical Specifications:
Keys: 4 key keypad for settings1) SET Key: To enter into FUNCTION SET Mode/To view the next set pt.
2) Up Arrow Key: To increment the set point
3) Down Arrow Key: To decrement the set point.
4) ENTER Key: To come out of FUNCTION SET
Mode/To enter into menu/To accept the password
Sensing1. Inbuilt current sensing for compressor.
2. Temperature Sensing by precise Temp. Sensor.
3. Fire Alarm sensing.
Terminals1) Separate O/P s for each Compressor.
2) Temperature sensor.
3) Alarm relay o/p.
Alarms/ Protections1) Over load protection set point user settable.
2) Under load protection set point user settable.
3) High/low temperature alarm set point user settable.




Additional Information:
  • Delivery Time: 2-3 weeks

Yes! I am Interested


Get Best Quote

Approx. Rs 29,500 / Piece Get Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Piece
BrandProton
Model Name/NumberTT-6
Supply VoltageSingle phase 230 VAC, 50 Hz
Output Contact Rating30 Amps. At 250 V AC for A/C contacts. 7 Amps. At 250 V AC for ALARM contact.
Current7A
Mounting TypePanel Mount, Plug-In, DIN Rail

Technical Specifications:
Front Panel1)16 char. 2 lines LCD display with backlight.
2) 4 Key keypad for programming.
3) A/C1 ON indication.
4) A/C2 ON indication.
5) A/C3 ON indication.
6) A/C4 ON indication
7) A/C5 ON indication
8) A/C6 ON indication.
9) Healthy Indication by blinking Green LED.
10) ALARM indication by Red LED.
Sensing1)Inbuilt voltage sensing for compressor.
2) Temperature sensing by precise Temp. Sensor.
3) Fire Alarm sensing.
Terminals1) Separate O/Ps for each Compressor.
2) Temperature sensor.
3) Alarm relay o/p.
Alarms/ Protections1) Over voltage protection set point user settable.
2) Under voltage protection set point user settable.
3) High/low temperature alarm set point user settable


Additional Information:
  • Delivery Time: 2-3 WEEKS

Yes! I am Interested


REQUEST CALLBACK
Get Best Quote

Approx. Rs 36,000 / Piece Get Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Piece
BrandProton
Model Name/NumberTT-7
Warranty1 YEAR
Country of OriginMade in India
Supply Voltage250 VAC +- 15 %
Output Contact Rating30 Amps at 250 V contacts.
Dimensions330mm(W) X 220 mm (H) X 80 mm (O)
Alarms ProtectionsHigh Pressure/Low pressure Alarm. High/low temperature alarm set point user settable. AHU fault Alm.
special FeatureModbus Compatibility with BMS over RS-485 Electrical Standard

Technical Specifications:
Front Panel16 char. x 2 lines LCD display with backlight. 4 Key keypad for programming.
A/C1 ON indication.
A/C2 ON indication.
A/C3 ON indication.
A/C4 ON indication.
A/C5 ON indication.
A/C6 ON indication.
A/C7 ON indication.
Healthy Indication by Green LED.
ALARM indication by Red LED.
SensingHigh Pressure(HP)/ Low Pressure(LP) sensing for every AC.
Temperature sensing by precise Temp. Sensor.
AHU fault sensing.
TerminalsSeparate O/Ps for each Compressor
HP/LP input for each A/C.(It should be potential free)


Additional Information:
  • Delivery Time: 2-3 WEEKS

Yes! I am Interested


Get Best Quote

Approx. Rs 4,000 / Piece Get Latest Price

Product Brochure
Product Details:
Aux Supply48V DC
Input Supply Voltage230 VAC +- 15 %
OutputsFan : 0-10V DC Compressor : 230 VAC +- 15 Damper : 48V DC
Front Panel1) 16 char. 2 lines LCD display with backlit. 2) 5 Key keypad for programming.
Network Connectivity1) RS-485 Modbus RTU 2) LAN
Dimensions150 mm x 200 mm x 80(H x W x D)

Technical Specifications:
Sensing1) Inbuilt Voltage current sensing in Power
2) Temperature Sensing by precise temp. sensor.
3) Tacho input from Fan
4) High Pressure/Low Pressure sensing for compressor
Terminals1) Compressor Output
2) Damper Output.
3) Temperature sensor.
4) AC alarm relay o/p.
5) Room High alarm relay o/p.
6) Fan Supply Output (0-10V DC)
Alarms/ Protections1) OV/UV protection set point user Selectable.
2) OL/UL protection set point user Selectable.
3) High/low temperature alarm set point

Yes! I am Interested


Get Best Quote

Approx. Rs 2,800 / Piece Get Latest Price

Product Brochure
Product Details:
System3 phase 4 wire 400 V AC, 50Hz +/- 15%.
Contact Rating3pole 16A contactor for compressor 25 Amp MCB for compressor outputs,
Temperature SensorThermistor Sensor NTC 10K @ 25 deg C Metal Body with Clamp.
Temperature Sensing Range0.0 deg C to 50.0 deg C.
IndicationsAC ON indication for AC1, AC2 and AC3 . Fault indication for AC1, AC2 and AC3.
Frequency50 Hz / 60 Hz range (+-5 Hz)
Environmental1] Working Temp : 0 to 55 deg C 2] Storage Temp : 10 to 70 deg C 3] Relative humidity : 0 - 95 %
Auxiliary PowerNo External power is required (Draws power from the voltage signal Inputs)
Accuracy1] Volt 0.25% rdg +- 1 dgts.2] Current 0.25% rdg +- 1 dgts.

Technical Specifications:
Measured Parameters1] Voltage (Volt) Phase - Phase measured. (RMS)
2] Unbalance Voltage measured Phase - Phase Unbalance measured.
3] Current (Amps) Compressor1, Compressor2, Heater, Blower (3Ph 4 w).
4] Room Temperature.
Protection1] Over Voltage Protection (Settable)
2] Under Voltage Protection (Settable).
3] Over Load Protection (Settable).
4] Under Load Protection (Settable).
5] Unbalance (Settable)
6] Reverse Phasing (Settable)
7] Phase Failure Protection (Settable)
8] High pressure (potential free input) (AC1/AC2)
9] Low pressure (potential free input) (AC1/AC2)
10] AHU Door Open (potential free input) (Blower/Master controller)
Communication Output1] Serial port : RS 485
2] Baud rate : Default: 9600
3] Start bit : 1
4] Stop bit : 1
5] Protocol : MODBUS - RTU

Yes! I am Interested


REQUEST CALLBACK
Get Best Quote

Approx. Rs 15,000 / Piece Get Latest Price

Product Brochure
Product Details:
Supply Voltage230 V AC, 50 Hz 15% separate phases for each A/C.
Contact Rating30 A at 230 V AC for Compressor Live Outputs 5 A at 250V AC for Alarm Potential Free Outputs (C,N,O)
Temperature SensorThermistor Sensor NTC 10K@25 deg C Metal body with clamp Sensor Cable Length: 2.75 meters
Temperature Sensing Range0.0 deg C to 55.0 deg C
Resolution1V for Voltage, 0.1 A for Current 0.1 deg C for temperature.
MountingWall Mounting

Technical Specifications:
Indications1) Supply ON for A/C1 A/C2, A/C3. Colour: Yellow
2)OV/UV Fault Colour: Red
3) Sensor Fail fault Colour: Red
4) Room temperature High fault Colour: Red
5) Healthy Colour: Green
6) Keys: 4 key keypad for settings. 1] SET Key : To enter into FUNCTION SET Mode/To view the next set pt. 2] Up Arrow Key : To increment the set point
3] Down Arrow Key: To decrement the set point.
4] ENTER Key: To come out of FUNCTION SET mode/To enter into menu/To
accept the password
7) Mounting : Wall mounting
8) Size : 245 mm (H) X 235 mm (W) X 67 mm (D

Yes! I am Interested


Get Best Quote

Approx. Rs 13,500 / Piece Get Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Piece
BrandProton
Model Name/NumberDAC-1
Temperature Sensing Range0 - 55 deg C
Supply Voltage230V AC, 50 Hz +/- 15% separate for each A/C.
Contact Rating30 A at 230 V AC for compressor Live Outputs 5 A at 250 V AC Alarm Potential free outputs(C, N/O)
Temperature SensorThermistor sensor NTC 10K @ 25 deg C metal body with clamp. Sensor cable length 2.75 meters.

Technical Specifications:
Resolution1 V for voltage, 0.1 A for Current 0.1 degree C for Temperature.Auto/Controller Bypass Switch is used to bypass the controller i.e. A/C 1 A/C 2 will remains ON(irrespective of temperature demands) if both switches are in ON condition.


Additional Information:
  • Delivery Time: 2-3 WEEKS

Yes! I am Interested


Get Best Quote

Approx. Rs 18,000 / Piece Get Latest Price

Product Brochure
Product Details:
Supply Voltage230 V AC, 50 Hz +- 15% separate Phase for each A/C
Contact Rating30 A at 230 V AC for Compressor Live Outputs 7 A at 250 V AC for Alarm Potential Free Outputs C,N,O
Temperature SensorThermistor Sensor NTC 10K@25 deg C Metal body with clamp Sensor Cable Length: 2.75 meters
Temperature Sensing Range0.0 deg C to 55.0 deg C
Resolution1V for Voltage, 0.1A for Current 0.1 deg C for temperature.
Dimensions245 mm (W) X 235 mm (H) X 67 mm (D)
MountingWall Mounting

Technical Specifications:
Indications1] Supply ON for A/C1 A/C2, A/C3 A/C4. Colour: Yellow
2] OV/UV Fault Colour: Red
3] Sensor Fail fault Colour: Red
4] Room High fault Colour: Red
5] Healthy Colour: Green
Keys4 key keypad for settings. 1] SET Key: To enter into FUNCTION SET Mode/To view the next set point
2] Up Arrow Key: To increment the set point
3] Down Arrow Key: To decrement the set point.
4] ENTER Key: To come out of FUNCTION SET mode/To enter into menu/To accept the password.


Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)

Yes! I am Interested


Get Best Quote

Approx. Rs 3,500 / Piece Get Latest Price

Product Brochure
Product Details:
Supply Voltage(3P) 415 V AC, 50 Hz +/- 15% separate for each A/C.
Contact Rating(3P) 9A 3 Phase Contactor for Live outputs and 5A at 250 V AC for Alarm Potential Free Outputs(C,N,O
Temperature SensorThermistor Sensor NTC 10K@25 deg C Metal body with clamp. Sensor Cable Length: 2.75 meters
Temperature Sensing Range0.0 deg C to 55.C deg
Resolution1V for Voltage, 0.1 A for Current 0.1 deg C for temperature.
Auto Controller Bypass SwitchTo bypass the controller i.e. A/C1 A/C2 will remain ON continuously if both the switches are in ON

Technical Specifications:
Indications1) SupplyON for A/C1 A/C2. Colour: Yellow
2) Auto Mode for A/C1 A/C2 Colour: Green
3) Manual Mode for A/C1 A/C2 Colour: Red
4) AC ON for A/C1 A/C2 Colour: Green
5) Fault for for A/C1 A/C2 Colour: Red
6) Room High Colour: Red
7) Healthy Colour: Green
Keys4 key keypad for setting
1) Set Key
2)Up (Arrow )Key
3)Down( Arrow ) Key
4)Enter Key


Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)

Yes! I am Interested


Get Best Quote

Approx. Rs 11,200 / Unit Get Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Unit
Current7Amps. at 230V AC
BrandProton
Model Name/NumberACC-02 (1P) ,ACC-02 (3P)
Power Supply UnitFor 3PN & 1 Ph Supply
Dimensions1) Controller : 245 mm X 150 mm X 60 mm 2)Power supply unit:-125mm X 68mm X168mm
Supply Voltage230 VAC +- 15 % for Single Phase 415 VAC +- 15% for Three Phase Separate power supplies for each AC

MICROCONTROLLERS with their inherent advantages are being increasingly used in the industry. With growing shortage and escalating cost of Electrical Energy, accurate monitoring of Air Conditioner's parameters has become necessary. 'TELEPAC MICROCONTROLLER is most useful for controlling A/Cs. This instrument is able to maintain Room Temperature with an accuracy of 0.1° C by automatic measurement of Room temperature and accordingly controlling AC ON/OFF.It also protects Costly Air conditioner from ‘Unhealthy conditions such as over load/under load etc. by automatically cutting off supply to it.
TELEPAC MICROCONTROLLER is provided with independent power supplies for each AC. Controller can work with any one or both power supplies.Under normal working condition at Power On,first “TELEPAC” message is displayed which remains about 4 secs. After that Healthy indication starts blinking alongwith the supply indication provided for both supplies separately. Now, depending on the Room Temperature & Set points Fan 1 will be started after Fan Startup Delay (Default 25 sec) & Compressor will be On after Cp1 Startup Delay (Default 120 sec) & after Startup Delay of Fan2 & Cp2 startup delay they will be started if required ( depending on room temperature ) This is ‘Normal Run Mode for the controller. In this mode display will show status of ACs showing current drawn by Compressor,voltage & room temp. In this mode ACs will be turned ON/OFF depending on Room temperature requirement & Setpoints.e.g. If Compressor Temperature cutin is set to 23°C then the AC will be ON if Room Temperature goes above 23°C & the AC will be turned OFF when Room Temperature goes below 20°C i.e. 3°C Hysterisis is provided also 0.1°C accuracy is achieved with the controller. if by some means Room Temperature remains below set point of one compressor & above set point of other. For example Compressor1 setpoint =20°C and Compressor2 set point =25°C & Room Temperature =22°C then Compressor2 may never be turned On & may cause problem to AC hence after specified time ( Shift Interval Set in Hrs.) the Temperature Set Points of the compressors gets interchanged automatically & now compressor2 will now be in service. If a fault occurs then ALARM indication on the front panel will be ON & the fault is displayed in the fault status also fault is stored in the Fault log history For Faults

Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 weeks

Yes! I am Interested


REQUEST CALLBACK
Get Best Quote

Approx. Rs 4,100 / Piece Get Latest Price

Product Brochure
Product Details:
Warranty1 YEAR
Current25 A
BrandProton
Country of OriginMade in India
System Supply230 VAC +/- 15%
Output Contact RatingOutput contact rating for AC 25 A at 230 VAC
Power On Delay Time1 minutes
Restart Delay Time3 minutes
Trip Time Delay3 sec for UV OV,5 sec. OL 5 minutes for UL Low lube oil pressure Fire n alternator fault
Over VoltageDefault 260 V .User settable by keys. 10 V hysteresis between Cutoff Cut in. Auto reset
Under VoltageDefault 180 V User settable by keys. 10 V hysteresis. Auto reset.
Over LoadDefault 15 A. User settable by keys.
Under LoadDefault 3 A user settable. Make it 0 A to bypass UL protection
On TimeDefault 60 min. User settable by keys
Off TimeDefault 30 min. User settable by keys
Indications1.Healthy: Indicates controller is working healthy. 2. ALARM : when this LED glows it indicates some

We are offering AC Protector to our clients.

Air conditioning systems are vitally needed by Cell sites, offices etc. The heart of an Air conditioner is its compressor hence some protection means must be provided to the compressor to protect it from abnormal conditions such as Over voltage,Under voltage , Over Loading, etc. The efficiency of an Air conditioner depends on its Compressor. The compressor cause problems due unhealthy conditions such as Over voltage, Under voltage etc. & frequent start/stop without prior time delay for pressure equalization. To take care of A/C from such electrical hazards ‘PROTON POWER CONTROL has developed a new innovative product “AC Protector.” AC Protector is a Microprocessor based system that controls operation A/C & also protect it from electrical hazards. It also indicate respective faults by messages & LED on front panel. All the set points such as Voltage, Current, Temperature are site selectable & user can easily set them by using keys provided on the front panel.

Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: 2-3 WEEKS

Yes! I am Interested


 






Corporate Brochure




 

 

Send SMS
Ajith Kumar Nimbalkar  (Proprietor)
Sai Enterprises
N0-5,ARJUN VILAS HEIGHTS, GROUND FLOOR, 15TH CROSS, GKW LAYOUT, DODDANNA INDL AREA, NEAR PENNYA 2ND STAGE, BANGALORE-560058
Peenya, Bengaluru - 560058 , Karnataka , India
Send E-mail
Share Us:
X