Sai Enterprises
Sai Enterprises
Peenya, Bengaluru, Karnataka
GST No. 29AHRPA5654N1ZN
Send E-mail
Send SMS
Home  » Our Products  » 

ANALYTICAL INSTRUMENTS


Matching with the customer’s requirements, we supply, trade and distribute huge collection of Analytical Instruments. We offer product to our patrons after testing them to ensure their correctness. 



Get Best Quote

Approx. Rs 2,200 / Piece Get Latest Price

Product Details:
Accuracy+- 0.2 % of Range
Range+- 2000 mV
Resolution+- 1mV
Repeatability+- 1mV
Display4 Digit Led With Auto Decimal & Polarity
Power Supply220-240 VAC, 50/60 Hz
EnclosureABS
Size96 x 96 x 100 mm

ORP Indicator - ATN ORP 19Online ORP Indicator cum Transmitter

Features

  • Advanced Embedded Microcontroller based design
  • Available in Panel type & Field type and Flame proof & Weather proof version
  • Easy front key calibration
  • 3 1/2 digit, 14mm high intensity red LED display

Yes! I am Interested


Get Best Quote

Approx. Rs 3,800 / Piece Get Latest Price

Product Details:
Power Supply230 V ac, 50 Hz, +-10%
Range0-20 ppm
Accuracy+-0.25% of Full Scale
Display2 Lines X 16 Characters LCD Backlit
Power ConsumptionLess than 10 VA
MountingWall / Field Mounted
Instrument NameDissolved Oxygen Indicating Controller Cum Transmitter
Model NoMS DO 27 W
InputFrom DO2 Sensor
Retransmission OP4-20 mA dc
Relay Output02 Nos Potential Free Relay Contact 1 C/o 1 Amp @230v Ac For High & Low
Temp CompPt100
Pressure CompManual Programmable
Isolation1.5 Kv Between Power Supply To Circuit
Operating Temp0 to 50 deg C Max
Relative Humidity5-95% @25 deg C
EnclusureABS IP 65
TerminationThrough Pin Type Lugs

DO Indicating Controller cum Transmitter - ATN DO 27 W
The dissolved oxygen sensor offers the most rugged design for 25 mm side ports. It fits directly into the vessel, eliminating the need for a housing, reducing contamination risks. The modular design allows quick replacement of any part, making it easy to maintain and repair the sensor.


Yes! I am Interested


Get Best Quote

Approx. Rs 3,000 / Piece Get Latest Price

Product Details:
Range0 to 20.00 ppm
Accuracy+- 1% Full Scale
Display4 Digit LED
Resolution0.01 ppm
MountingPanel Mounted
InputFrom DO2 Sensor
Calibration2 Points - Soft Key
Set Point02 Nos.
Control Output02 Nos. Potential free 230 VAC / 5A
Retransmission Output4 to 20 mA Isolated
Communication OutputRS 485 Modbus RTU - Optional
Data LoggingBuilt in - Optional
Temp CompensationAuto / Manual - Pt 100
Pressure CompensationManual Programmable
Operating Temp0 to 50 deg C
Dimensions96 x 96 x 85 mm

DO Indicating Controller cum Transmitter - ATN DO 27

Features:
  • Microprocessor based
  • Bright LED display
  • Isolated 4 -20 mA Output Isolated
  • Two Programmable Relays
  • Communication Output - RS 484 Modbus RTU - Optional
  • Built in Memory Logging - Optional
  • Password Protection

Yes! I am Interested


Get Best Quote

Approx. Rs 2,800 / Piece Get Latest Price

Product Details:
Range Temperature0.0 to 50.0 deg C
Resolution Temperature0.1 deg C
Accuracy Temperature+-0.2 deg C (excluding probe error)
Temperature CompensationAutomatic, 0 to 50 deg C (32 to 122 deg F)
Altitude Compensation0 to 4000 m (resolution 100 m)
Salinity Compensation0 to 80 g/L (ppt) (resolution 1g/L)
Environment0 to 50 deg C (32 to 122 deg F); RH max 95%
Dimensions185 x 72 x 36 mm (7.3 x 2.8 x 1.4")
Weight300 g (10.6 oz)

Dissolved Oxygen Meter With Extended Range - ATN 0257

Introduction:
ATN 0257 is a water-resistant, dissolved oxygen meter that measures up to 300% saturation or 45 ppm (mg/L) with temperature compensation and automatic calibration. It has been developed for DO and temperature measurement in water, wastewater, and applications such as fish farming.
This instrument also allows altitude compensation up to 4000 m and the ppm and % saturation are both compensated for changes in solubility of oxygen in water and for permeability of the membrane as well as the temperature effect.
The included polarographic probe features built-in temperature compensation and removable protective membrane cover.
Feature:
  • On-screen tutorial messages
  • Two point calibration
  • Auto endpoint
  • DO range up to 300%, temperature compensated
  • Altitude compensation up to 4000 m
  • Salinity compensation up to 80 g/L
  • Automatic calibration in air
  • GLP features
  • Low battery indicator

Specifications:
Range O20.00 to 45.00 mg/L (ppm)
Range % Saturation O20.0 to 300.0%
Resolution O20.01 mg/L (ppm)
Resolution % Saturation O20.001


Accuracy O2+-1.5% FS
Accuracy % Saturation O2+-1.5% FS


Dissolved Oxygen Calibration
one or two points at 0%(zero solution) and 100% (in air)
ProbeMS 87518/4F polarographic DO probe, internal temperature
sensor, DIN connector and 4 m cable (included)
Battery Type / Life1.5V AAA (3) / approx 200 hours of continuous use without
backlight (50 hours with backlight on)

    Yes! I am Interested


    Get Best Quote

    Approx. Rs 20,000 / Piece Get Latest Price

    Product Details:
    Display3.5 Digit Led Display With Auto Polarity & Decimal
    CalibrationTwo Buffers Calibration (Manually) 7ph & 4ph Or 9.2ph
    Range0.00 to 14.00 pH
    Resolution0.01 pH
    Accuracy0.01 pH +- 1 digit
    Input Impedance1012 Ohms
    Temperature Control0 to 100 deg C Manual
    Power Requirement230v A.C +- 10%, 50hz Single Phase
    Environment5 to 50 deg C
    Dimensions205 X 65 X 130mm ( Aluminum Powder Coated Cabinet )
    Weight1.5kgs (Approx) Including Accessories

    Table Top pH Meter - ATN pH 616:
    • It is a high-precision pH meter for continuous 0-14 pH reading & milivolts.
    • The pH meter is easy to operate as it has the least number of controls.
    • CHECK facility saves time from every day buffer standardization and hence is most suitable for quick analysis.
    • It is a very sleek attractive finished instrument.

    Yes! I am Interested


    Get Best Quote

    Approx. Rs 2,800 / Piece Get Latest Price

    Product Details:
    Ph Electrode(Included) Atn 2242b, Glass-body, Single Junction, Refillable, Bnc Connector, 1m Cable
    Dimensions240 x 182 x 74 mm (9.4 x 7.1 x 2.9")
    Pc ConnectionRs-232 Serial Port
    Range pH-2.00 to 16.00 pH; -2.000 to 16.000
    Range mV+-999.9 mV ; +-2000 mV
    Range Temp-9.9 to 120.0 deg C
    Resolution pH0.01 pH; 0.001 pH
    Resolution mV0.1 mV; 1 mV
    Resolution Temp0.1 deg C
    Accuracy(@20 deg C): (pH) +-0.01 pH; +-0.002 pH
    pH CalibrationAutomatic, 1 Or 2 Points With 5 Automatically Recognized Buffers (Ph 4.01, 6.86, 7.01, 9.18, 10.01)
    Temp CompensationAutomatic (With Atn 8770/2w Probe) Or Manual From -9.9 To 120 deg c
    Temperature Probe(Included) Atn 8770/2w With 1 M Cable (Included)
    Input Impedance1012 Ohm
    Power Supply(Included) 12 Vdc Adapter
    Environment0 to 50 deg C (32 to 122 deg F); RH max 95%
    Weight1.1 kg

    pH Bench Meter with 0.001 resolution and Stability Indicator ATN 324

    Overview:
    • With 0.001 pH resolution and +-0.002 pH accuracy, the ATN 213 is designed for applications that require high precision.
    • Calibration is performed at 1 or 2 points with 5 memorized buffers and has an automatic buffer recognition feature. The automatic buffer recognition feature eliminates calibration errors that can occur when a wrong buffer solution is used during the calibration process. The user is guided through the calibration process with simple instructions on the display.
    • In measurement mode, ATN 324 features an electrode stability indicator that helps to avoid erroneous readings taken while the pH electrode is not yet stable.
    • The mV scale auto-ranges and changes resolution from 0.1 to 1 mV when readings exceed +-999.9 mV. The extended range allows more flexibility in ORP measurements.
    • ATN 324 also features data memory and recall functions, ATC and PC compatibility via an opto-isolated RS-232 port.



    Yes! I am Interested


    Get Best Quote

    Approx. Rs 2,500 / Piece Get Latest Price

    Product Details:
    Display3.5 Digit Lcd Display
    CalibrationTwo Buffers Calibration (Manually) 7ph & 4ph Or 9.2ph
    Range0.00 to 14.00 pH
    Resolution0.01 pH
    Accuracy0.05 pH +- 1 digit
    Input Impedance5 x 10 11 Ohms
    Temperature Control0 - 80 deg c Manual
    Power Requirement9v Dry Cell Flat Pack Battery
    Environment5 to 50c
    Dimension78x105x40mm ( ABS Cabinet )
    Weight500gms (Approx)

    Portable pH Meter - ATN pH 816 ATN pH 816 is a compact Handy highly precision pH meter for continuous 0-14 pH reading & is easy to operate as it is having least number of controls. Auto Bat. Low Indication is displayed as BAT when battery voltage falls to 7.6 volts dc.

    Yes! I am Interested


    Get Best Quote

    Approx. Rs 3,000 / Piece Get Latest Price

    Product Details:
    Resolution0.1 mg/L
    Range0 to 20 mg/L
    ATCYes
    SizePocket Size
    DisplayLCD 13 mm
    Overall Size131 x 70 x 25 mm

    Portable Dissolved Oxygen Meter - ATN DO 6610

    Yes! I am Interested


    REQUEST CALLBACK
    Ask for Price

    Price on Request: Get Latest Price

    Product Details:
    Range-2.00 to 16.00 pH
    Accuracy+-0.01 pH
    Input Impedance1012 Ohm
    Dimensions or Weight164 x 76 x 45 mm (6.5 x 3.0 x 1.8") / 180 g (6.3 oz.)
    Temperature ProbeMicro 8773 with 1 m cable (included)
    pH Calibrationautomatic, 1 or 2 point with 3 memorized buffervalues (pH 4.01, 7.01, 10.01)

    Slim pH Meter - ATN 9535 Waterproof with Automatic Calibration & Temperature Compensation Top Performance in a Sleek, Lightweight Design The ATN 9535 portable pH meter is one of the most popular pH meters on the market. By utilizing an advanced, custom microprocessor, MS 9535 is able to perform pH, ORP and temperature measurements with high accuracy and fast response.
    The mV measurements auto-range and change resolution from 0.1 to 1 mV when readings reach +-699.9 mV. pH slope changes due to temperature variation are automatically or manually compensated for, from -20 to 120 DegreeC (-4.0 to 248.0 DegreeF). The meter has 3 standard buffer values (pH 4.01, 7.01, 10.01), and automatic buffer recognition to avoid errors during calibration. When powered on, the percentage of remaining battery life is indicated on the display pannel. The HOLD function can freeze the reading on the display to be manually recorded at a more convenient time.
    Choose from DegreeC or DegreeF. Users can enable ordisable the Auto-off feature, the acousticsignal and the back-lit display. In addition, ATN 9535 indicates the buffer values used for the most recent calibration.

    Feature

    • Small form and lightweight
    • Battery life displayed on LCD
    • Auto shut-off


    Yes! I am Interested


    Get Best Quote

    Approx. Rs 2,800 / Piece Get Latest Price

    Product Details:
    MOCHDPE
    Temp Range0-80 deg C
    Process Connection for Sensor1/2" BSP Female, 1/4" BSP Female

    Technical Specification
    MOC:HDPE
    Temp Range:0-80°C
    Process Connection for Sensor:½” BSP Female
    Process Connection for Sensor:¼” BSP Female

    Yes! I am Interested


    Get Best Quote

    Approx. Rs 3,500 / Piece Get Latest Price

    Product Details:
    Size96 x 96 x 64 mm
    Range0 ~ 2000 uS/cm (Specify)
    Measuring Accuracy+-1% FS of all Range Counts@30 deg C
    Indication3.5 digit LED display
    Cell AssemblyCell with 1/2" BSP threading
    Power Requirement230 V AC +-10%, 50 Hz Single Phase
    Environment0 ~ 50 deg C

    On-line Panel Mounted Conductivity Indicator - ATN CD 18

    Introduction
    It is an economical meter for online measurement of specific Conductivity of solution using a Conductivity cell for RO plant or DM plant applications. It enables to measure the Conductivity without manual balancing and specific Conductivity is read directly on a digital panel. This is available in panel mounting facility in compact size.


    Yes! I am Interested


    Get Best Quote

    Approx. Rs 4,000 / Piece Get Latest Price

    Product Details:
    Dimension205mmx65mmx130mm.
    Frequency SourceIn Built Automatically Selected
    Selectable Ranges0-20uS, 200us, 2ms & 200ms / cms,
    Measuring Accuracy+-1% of F.S. in all ranges +-1 count @ 20 deg C
    Indication3.5 Digit LED
    CalibrationSingle Point Manually
    DecimalAutomatic Selection
    Conductivity CellApprox. 1.0 Cell Constant With Plastic Protective Cover (Optional 0.1 Cell)
    Power Requirement230 +-10% 50 Hz single phase approx
    Environment0 to 50 deg C
    Weight1.5 Kg. in Aluminum Cabinet
    Standard AccessoriesConductivity Cell, Stand, Rod, Clamp & Manual

    Conductivity Meter - ATN CD 622Owing to our manufacturing facilities, we offer a wide array of Digital Conductivity ATN CD 622 This instrument is a reading meter that measures the solution's conductivity with the aid of a Conductivity cell. Without the manual balance, the specific conductivity can be read on the digital display. Integrated circuits are included in these instruments and that keep the power consumption low.

    Yes! I am Interested


    Get Best Quote

    Approx. Rs 4,000 / Piece Get Latest Price

    Product Details:
    Dimension205mmx65mmx130mm.
    Frequency Source1kHz in Built
    Selectable RangesConductivity : 0-20uS, 200us, 2ms & 200ms / cms, TDS : 20ppm, 200ppm, 2ppt & 200ppt
    Measuring Accuracy+-1% of F.S. in all ranges +-1 count @ 20 deg C
    Indication3.5 Digit LED
    CalibrationSingle Point Manually
    Conductivity CellApprox. 1.0 Cell Constant With Plastic Protective Cover (Optional 0.1 Cell)
    Power Requirement230 +-10% 50 Hz single phase approx
    Environment0 to 50 deg C
    Weight1.5 Kg. in Aluminum Cabinet
    Standard AccessoriesCell, Stand, Rod, Clamp, Dust Cover & Manual

    Digital TDS & Conductivity Meter - ATN CD 610622
    Owing to our manufacturing facilities, we offer a wide array of Digital TDS & Conductivity ATN CD 610622.This instrument is a reading meter that measures the solution's TDS & conductivity with the aid of a cell. Without the manual balance, the specific TDS & conductivity can be read on the digital display. Integrated circuits are included in these instruments and that keep the power consumption low.

    Yes! I am Interested


    Get Best Quote

    Approx. Rs 3,500 / Piece Get Latest Price

    Product Details:
    Range0.0 to 199.9 S/cm 0 to 1999 S/cm 0.00 to 19.99 mS/cm 0.0 to 199.9 mS/cm
    Resolution0.1 S/cm 1 S/cm 0.01 mS/cm 0.1 mS/cm
    Accuracy+-1% F.S. (excluding probe error)
    CalibrationManual, 1 Point
    Temp CompensationAutomatic, 0 to 50 deg C (32 to 122 deg F) with adjustable from 0 to 2.5%/ degC
    ProbeMS 87413W, ATC, with 1 m (3.3') cable (included)
    Battery Type Life1 X 9v / Approx. 100 Hours Of Continuous Use
    Environment0 to 50 deg C (32 to 122 deg F); RH max 100%
    Dimensions164 x 76 x 45 mm (6.4 x 3.0 x 1.8")
    Weight250 g (8.8 oz.)

    Multi-range Conductivity Meter - ATN 9844

    Designed for QC and Production:

    • ATN 9844 has been designed specifically for use in areas of production and quality control. It is often necessary to test samples ranging from deionized water to brine.
    • The rugged probe is made of PVC, which is ideal for indoor and outdoor measurements.
    • Using one point calibration, it is now possible to obtain accurate readings across a very wide range, from 0.1 to 199.9 ms/cm.
    • If the temperature of the solution fluctuates, ATN 9844, with a built-in temperature sensor and Automatic Temperature Compensation, is the perfect instrument.
    • As an accessory, ATN 832424 is available. The kit includes a rugged carrying case with a beaker, a calibration screwdriver.

    Feature:

    • Rugged probe for indoor/outdoor measurements
    • Allow for calibration across a wide range
    • Automatic temperature compensation

    Yes! I am Interested


    Get Best Quote

    Approx. Rs 1,500 / Piece Get Latest Price

    Product Details:
    Range0 ~ 14 pH
    Accuracy+-0.01 pH
    Display3 1/2 Digit, 14 mm Red LED
    Repeatability+-1 LSB
    Retransmission4 to 20 mA Isolated
    Power Supply220-240 VAC, 50-60 Hz
    EnclosureABS
    Size96 x 96 mm

    On-line Panel Mounted pH Indicator cum Transmitter ATN pH 19
    Introduction:
    ATN Digital pH meter Type ATN pH 19 is a precise and compact pH Indicating System using latest technology of electronics for direct measurement of pH. The high input impedance, accuracy and the stability of its measuring circuit enable it to make the measurements with precision and reproducibility.

    Yes! I am Interested


    Get Best Quote

    Approx. Rs 1,200 / Piece Get Latest Price

    Product Details:
    Cell Constant1 / 0.1 / 0.01
    Range0 to 50 ppm for cell constant 0.01 0 to 500 ppm for cell constant 0.1 0 to 5000 ppm
    Accuracy+-2% FS
    Temperature Range0 to 150 deg C
    Maximum Pressure10 kg/cm2
    Material of ConstructionSS 316
    Process Connections1) 3/4" NPT Threaded 2) 1" ASA 150 Flanged 3) 1" Tri-clover
    Insertion Length1) 50 mm for cell constant 0.01 2) 27.5 mm for cell constant 0.1 3) 28 mm for cell constant 1
    MountingInsertion (Screw-in)
    Standard Cable Length3 mtr.
    Weight0.5 kg

    Conductivity Sensor - ATN TDS 111
    Introduction:
    ATN TDS Sensors are designed for fast, easy & trouble free start up. These are ideal for measuring the concentration of dissolved solids in water. They are provided with an accurate pre-etermined factory calibration constants. Rugged design & corrosion resistant material keep electrode spacing & surface area constant so cell constant remain stable for long period. Durability of material & high resistance to corrosion ensures the long life & require low maintenance.

    Features:
    • Measure concentration of dissolved solids in water
    • Accuracy @ 2% FS
    • Available with 1 / 0.1 / 0.01 cell constants
    • Temperature compensation through Pt 100 sensor
    • Flow through assembly in SS 316

    Yes! I am Interested


    Get Best Quote

    Approx. Rs 3,200 / Piece Get Latest Price

    Product Details:
    Type of InputFrom Conductivity Electrode
    Cell Constant1 / 0.1 / 0.01
    Display2 x 16 Characters Backlit
    AccuracyBetter than + 0.25% F. S.
    Power Supply1) 24 V DC, External 2) 90 - 250 V AC, 50 Hz +/- 10%
    Power Consumption10 VA
    Temperature Drift0.01% of F. S. per deg C change
    Response Time500 mSec
    Isolation1.4 KV between Input, Output & Power Supply
    Retransmission Output4 to 20 mA Isolated
    Temp CompensationPt -100
    Alarm02 Nos.
    MountingWP enclosure Field Mounted
    Weight1.5 kg (Approx.)
    Operating ConditionsTemperature 0 to 55 0C / Humidity 5 to 95% non condensing
    Enclosure1) DIN Std. 2) Weather-proof, IP-65 3) Flame-proof, IP -65, IIA, IIB CMRI Certified
    Calibration Range0 to 100 uS/cm for cell constant 0.01 0 to 1000 uS/cm for cell constant 0.1 0 to 10000 uS/cm for cel

    Conductivity Indicating Controllers Model: ATN CD 912 ATN Series ATN CD -912 is Conductivity Indicator specially designed for various industrial applications. These can be used for monitoring Conductivity of a solution. The measuring range and control points are settable through the keypad on front fascia and control output is available at the rear terminals. Retransmission output, communication port are additive features of ATN CD -912.

    Yes! I am Interested


    Get Best Quote

    Approx. Rs 3,500 / Piece Get Latest Price

    Product Details:
    Range2000 Us/cm Or Specify The Range
    Measuring Accuracy+-1% Of Full Scale In All Ranges Count @30 Deg C
    Indication3.5 Digit Led Display
    CalibrationKeypad Calibration
    Control Setting2 Changeover Relay Potential Free Contact Of 5 Amps
    Power Requirement230 V Ac+-10%, 50 Hz Single Phase
    Output4~20 mA DC (Optional)
    Size96 x 96 x 120 mm
    Environment0 to 50 deg C

    Conductivity Indicating Controller - ATN CD 09

    Introduction:
    It is an economical meter for online measurement of specific Conductivity of solution using a Conductivity cell for RO plant or DM plant applications. It enables to measure the Conductivity without manual balancing and specific Conductivity is read directly on a digital panel. This is available in panel mounting facility in compact size.



    Yes! I am Interested


    Get Best Quote

    Approx. Rs 1,200 / Piece Get Latest Price

    Product Details:
    Measuring Range0~200%
    Temp Range0~40 deg C
    Max Operating Pressure1 Bar
    LinearityThis is a Straight Line
    OutputZero Mv In Sodium Sulphate Zero Solution, 35-55mv In Air
    Dimensions120x12mm
    ATCPt 100
    Cable5 Meter
    Lifetime2 Years Under Normal Usage

    Galvanic - Maintenance Free DO2 Electrodes ATN DO 714 / PT100 / 5M The unique sealed membrane allows ease of use of the DO2sensor without the need for spare membranes and refilling solutions whilst still guaranteeing accurate results and long life.

    Yes! I am Interested


    Get Best Quote

    Approx. Rs 1,000 / Piece Get Latest Price

    Product Details:
    Measurement PrincipalAmperometric - Polarographic
    Output25 - 50nA
    Output Signal In AirApprox. 67 nA at 25 deg C
    Temperature RangeOperation: 0 to 80 deg C
    StabilityBetter Than 2% Of Readout Per Week At Constant Pressure And Temp (30 Deg C)
    Maximum Pressure4 Bar (Atm), 58 Psig
    Oper Temperature Range0 to 80 deg C
    Shaft Material316SS
    Shaft Diameter25 mm
    Cable Connector4-pin

    Dissolved Oxygen Sensors for Standard 25 mm Ports - ATN DO 3623

    The dissolved oxygen sensor offers the most rugged design for 25 mm side ports. It fits directly into the vessel, eliminating the need for a housing, reducing contamination risks. The modular design allows quick replacement of any part, making it easy to maintain and repair the sensor.

    Feature

    • 316L Stainless Steel
    • Sterialized for traceability
    • RA32 Finish with Electropolish on wetted parts
    • Internal and External Silicone O-rings
    • Secured retainer ring

    Yes! I am Interested


    Get Best Quote

    Approx. Rs 2,200 / Piece Get Latest Price

    Product Details:
    TypeGalvanic
    CathodeAG
    AnodePB
    Diameter10mm
    BodyGlass
    Response98% in 90 Seconds
    Temperature CompensationNO
    Temperature Range0 to 60 deg C
    Sterilization Temp130 deg C
    Residual Signal0.5 +-1 mV
    Output Medium Saturated With Air40 mV +- 5 mV

    Dissolved Oxygen Sensor - ATN 482:
    This series of steam sterilizable electrodes are designed for economical use. They are constructed very similar to the standard pH electrodes, have a 10 and 12mm body, and can be ordered with the desired length. Length is determined by the insertion depth on the under side of the fermentor head plate to the tip of the probe. Glass disposable electrodes are available in galvanic styles to fill all requirements. The glass DO probes are available for laboratory fermentation, where sterilization takes place in a separate autoclave. The disposable Dissolved Oxygen Electrodes are compatible with most common oxygen amplifiers. Glass body oxygen electrodes are non temperature compensated and are required to be kept at a constant temperature. Calibration must be made at the same temperature as the controlled fermentation. The electrodes feature external filling tubes. Electrolyte can be added during use without removing the electrode from the vessel. The electrode membranes can be replaced very easily. However, some skill is involved in replacing them.

    Yes! I am Interested


    Get Best Quote

    Approx. Rs 3,500 / Piece Get Latest Price

    Product Details:
    Display2 x 16 Characters LCD Backlit
    Relative Humidity5-95 % RH Non Condensating
    Operating Temp0 TO 55 deg C
    OutputRetransmission 4 to 20 mA Isolated ( Optional)
    Power Supply230 VAC, +- 10%, 50 Hz
    Accuracy+- 0.2% of FS
    Resolution1 mV
    Set Points02 Nos. High & Low
    Control Output02 Nos. Potential Free Relay 230VAc/ 5A
    EnclosureABS
    Dimensions96 x 96 x 120 mm
    MountingPanel Mounted

    ORP Indicating Controllers ATN ORP 27:
    It is a high-precision ORP meter for continuous mV. The ORP meter is easy to operate as it has the least number of controls. CHECK facility saves time from every day buffer standardization and hence is most suitable for quick analysis.
    It is a very sleek attractive finished instrument.

    Yes! I am Interested


    Get Best Quote

    Approx. Rs 1,200 / Piece Get Latest Price

    Product Details:
    Range+- 2000 mV
    BodyCPVC
    TypeCombination
    Pressure6 Bar
    Temperature0~80 deg C
    JunctionDouble Junction Ceramic
    TipPlatinum
    Process Connection3/4" BSP Male
    MountingImmersion or In Line Mounting
    Cable Length5 Meter with BNC

    SPECIFICATION Make : MicroSet Model : MS ORP 01 Type : Combination Range : ± 2000 mV Temp Range : 0 to 60°C Ref Type : Double Junction AgCl Junction Type : Ceramic Diameter : 12 mm Overall Length : 85mm Body : Epoxy Pressure : 5 Bar Process Connection : ½” & 3/4” BSP With integral cable of 5 Meter long with BNC connector 

    Yes! I am Interested


    Get Best Quote

    Approx. Rs 1,800 / Piece Get Latest Price

    Product Details:
    Range+- 2000 mV
    BodyRyton
    Pressure100 PSIG
    Temperature0~105 deg C
    Accuracy+- 20 mV
    JunctionTeflon
    Measurement TipGlass with Platinum Electrode
    Cable Length15 Feet (4.5 m) with BNC Connector
    Process Connection3/4" NPT Male
    MountingImmersion or In Line Mounting

    Specification
    Range:± 2000 mV
    Body:Ryton
    Pressure:100 PSIG
    Temperature:0~105°C
    Accuracy:± 20 mV
    Junction:Teflon
    Measurement Tip:Glass with Platinum Electrode
    Cable Length:15 feet (4.5 m) with BNC connector
    Process Connection:¾” NPT Male
    Mounting:Immersion or in-line mounting

    Yes! I am Interested


    Get Best Quote

    Approx. Rs 2,500 / Piece Get Latest Price

    Product Details:
    Weight1 kg
    Mounting2" Pipe Mounting
    Electrical Connections3/4" ET
    Dimensions135 (H) x 249 (W) including cable gland x 170 (D) in mm approx.
    Operating ConditionsTemperature 0 to 55 deg C / Humidity 5 to 95% Non-condensing
    EnclosureIIB CMRI Certified, IP-65, Flame-proof, IIA, Weather-proof
    Temperature Coefficient+-0.01% per deg C
    Response Time500 mSec
    Power Consumption50 mW
    Power Supply24 V DC, External
    Isolation1.4 KV between Input, Output & Power Supply
    Accuracy+-0.25% FS
    Temperature CompensationAuto / Manual Through Rtd, Pt 100 Sensor For 0-100 Deg C
    Type of InputFrom Conductivity Electrode
    Cell Constant0.01 / 0.1 / 1
    Type of Output4 - 20 mA DC, 2 Wire Isolated
    Display8 x 1 LCD

    Conductivity Indicating Transmitter - Field - ATN CD 112
    Introduction:
    ATN Conductivity transmitters are used for various industrial applications. It can accept input from conductivity electrode of cell constant 1 / 0.1 / 0.01 & conductivity signal is transmitted in the form of electrical 4 - 20 mA signal. The on-line conductivity indication is provided through LCD. Span/Zero adjustments are easily accessible.

    Features:
    • On-line measurement
    • 2 wire system
    • 4-20 mA DC output
    • Auto/Manual temperature compensation
    • On-Line indication through LCD display
    • Flame-proof, IP-65, IIA, IIB CMRI certified housing

    Yes! I am Interested


    Get Best Quote

    Approx. Rs 2,500 / Piece Get Latest Price

    Product Details:
    ApplicationCip, Sip, Wfi And Other Chemicals
    Cell Constant1 / 0.1 / 0.01
    Accuracy+- 2% FS
    Temperature Range0 to 150 deg C
    Maximum Pressure10 kg/cm2
    Material of ConstructionSS 316
    Process Connections1) 3/4" NPT Threaded 2) 1" ASA 150 Flanged 3) 1" Tri-clover
    MountingInsertion (Screw-in)
    Standard Cable Length5 mtr.
    Weight0.5 kg

    Conductivity Sensors ATN CD 111
    IntroductionATN Conductivity Sensors are designed for fast, easy & trouble free start up. These are ideal for measuring the concentration of dissolved solids in water. They are provided with an accurate pre-determined factory calibration constants. Rugged design & corrosion resistant material keep electrode spacing & surface area constant so cell constant remain stable for long period. Durability of material & high resistance to corrosion ensures the long life & require low maintenance.

    Feature
    • Measure concentration of dissolved solids in water
    • Accuracy @ 2% FS
    • Available with 1 / 0.1 / 0.01 cell constants
    • Temperature compensation through Pt 100 sensor
    • Flow through assembly in SS 316

    Specifications
    Range0 to 100 S/cm for cell constant 0.01
    0 to 1000 S/cm for cell constant 0.1
    0 to 10000 S/cm for cell constant 1
    Insertion Length1) 50 mm for cell constant 0.01
    2) 27.5 mm for cell constant 0.1
    3) 28 mm for cell constant 1


      Yes! I am Interested


      Get Best Quote

      Approx. Rs 3,000 / Piece Get Latest Price

      Product Details:
      Input+/-550mV from pH electrode Or +/-1000mV from ORP electrode From Pt-100 Sensor RTD Pt-100 for Temp.
      Range0~14 pH, +- 1000 mV
      Resolution0.01 pH, 1 mV
      Accuracy+- 0.05 pH, +- 10 mV
      Repeatability+- 0.05 pH , +- 1 mV
      Display8 x 1 LCD Display
      Ret Output4~20 mA DC
      Temp CompAuto/Manual (Programmable) ( Pt-100 ) ( 0 to 125 deg C)
      Power Supply24 V dc, 30 mA
      Enclosure ClassIP66, Flame Proof, Group IIA, IIB
      Enclosure MaterialDie Cast Aluminum LM-6
      Enclosure Size130mm (H) x 115mm (W) x 190mm (D)
      Mounting2 Pipe Mounting
      Cable Entry3/4" ET, Double Compression
      TerminationThrough Pin Type Lugs
      Environment Operating Temp0 to 55 deg C
      Environment Operating Humidity5 to 95% RH Non-Condensing

      Online Field Mounted pH Indicating Transmitters ATN pH 18 T

      Feature:
      • Advanced embedded micro controller based design
      • Easy front key calibration
      • Multi parameter display by a key press
      • Error code for Self Diagnosis
      • Pass code Provision for Authorized Settings
      • 8 x 1 LCD Display

      Yes! I am Interested


      Get Best Quote

      Approx. Rs 2,000 / Piece Get Latest Price

      Product Details:
      Pressure2 Bar
      BodyGlass
      Cable Length1 Meter with BNC Connector
      JunctionCeramic
      Temperature0~100 deg C
      Range0 to 14pH
      TypeCombination
      Sensor OutputmV (+- 59.4 mV/pH change at 25 deg C)

      SPECIFICATION Range : 0 to 14pH Body : Glass Type : Combination Sensor Output : mV (± 59.4 mV/pH change at 25°C) Pressure : 2 Bar Temperature : 0~100°C Junction : Ceramic Cable Length : 1 Meter with BNC connector 

      Yes! I am Interested


      Get Best Quote

      Approx. Rs 3,000 / Piece Get Latest Price

      Product Details:
      Pressure100 PSI
      Cable Length5 mtrs
      Process Connection3/4" NPT
      pH Range0-14
      Temp Range0-100 deg C
      Ref TypeAgCl
      Junction TypePorous Teflon
      Diameter150x25.9mm
      CombinationYes
      Body TypeRyton

      Technical Specification
      pH Range:0-14
      Temp Range:0-100°C
      Ref. Type:AgCl
      Junction Type:Porous Teflon
      Diameter:150x25.9mm
      Process Connection:¾” NPT
      Combination:Yes
      Body Type:Ryton
      Pressure:100 PSI
      Cable Length:5 mtrs

      Yes! I am Interested


      Get Best Quote

      Approx. Rs 3,000 / Piece Get Latest Price

      Product Details:
      Pressure7 Bar
      BodyRyton
      Cable LengthLow Noise Teflon Shielded 5 Mtrs With Bnc Connector
      JunctionDouble Junction Teflon
      MountingImmersion Or In-line Mounting
      Process Connection3/4" NPT Male
      Temperature0 ~110 deg C
      Temperature CompensationPt-100 Built-in
      Range0~14 pH

      SPECIFICATION Range : 0~14 pH Body : Ryton Pressure : 7 Bar Temperature : -10 ~110°C Temperature Compensation : Pt-100 Built-in Junction : Teflon Cable Length : Low Noise Teflon Shielded 5 mtrs with BNC connector Process Connection : ¾” NPT Male Mounting : Immersion or in-line mounting  

      Yes! I am Interested


      Get Best Quote

      Approx. Rs 2,800 / Piece Get Latest Price

      Product Details:
      Accuracy+-0.1 ppm
      Range0 to 20 ppm
      Repeatability+- 0.1 ppm
      Dissolved OxygenPolarographic Type
      TemperatureSemiconductor type
      Readout3 1/2 Digit 7 segment LED display of 12.7 mm height
      Recorder Output10mv / Ppm Into 10k Ohm Resistive Load

      Dissolved Oxygen Analyser - ATN DO 246

      Salient Features And Benefits:
      - Highly sensitive & stable
      - Manual Temperature Compensation

      Applications:

      • Natural Water:
        To ensure the state of dynamic equilibrium of DO maintained by biochemical deplection by bacteria for the food chain and continued re oxy-generation by aeration and photosynthesis and thus the availability
        of right amount of DO which is vitally important for flora and fauna in water.
        To detect pollution - lower level of DO (normal 7.1 ppm) will adversely affect the aquatic life.
      • Sewage Wastes:
        To ensure biochemical break-down treatment of sewage which is achieved by bacterial attack which requires DO.Non-availability of DO leads to increase activity of anaerobic, sulphate reducing bacteria resulting in production of hydrogen sulphide causing serious corrosion problem.
      • Microbial Studies:
        To study effects of drugs on the brain tissues, other organs/limbs, circulation system muscle and connective tissues, malignant tissues and surface.
      • Agriculture:
        To ensure sufficient aeration in soil needed for underground respiration of plant roots in addition to photo synthesis.
      • Foods & Drugs:
        To ensure oxidation is not adversely affecting the food stuffs. To ensure DO requirements for fermentation in foods, distilleries and Bio-synthetic preparations in Drugs & Chemicals.
      • Boiler Feed Water:
        To ensure proper level of DO to avoid oxidative corrosion of Boiler pipes in steam generation, heaters etc.

      Yes! I am Interested


      Get Best Quote

      Approx. Rs 2,000 / Piece Get Latest Price

      Product Details:
      Range Conductivity0.00 to 29.99 uS/cm; 30.0 to 299.9 uS/cm; 300 to 2999 uS/cm; 3.00 to 29.99 mS/cm; 30.0 to 200.0 mS/c
      Range TDS0.00 to 14.99 mg/L (ppm); 15.0 to 149.9 mg/L (ppm); 150 to 1499 mg/L (ppm); 1.50 to 14.99 g/L (ppt);
      Range NaCl0.0 to 400.0%
      Range Temp-9.9 to 120.0 deg C
      Resolution Conductivity0.01 uS/cm; 0.1 uS/cm; 1 uS/cm; 0.01 mS/cm; 0.1 mS/cm
      Resolution TDS0.01 mg/L; 0.1 mg/L; 1 mg/L; 0.01 g/L; 0.1 g/L
      Resolution Temp0.1 deg C
      Accuracy TDS+-1% of reading +- (0.03 mg/L or 1 digit)
      Accuracy Temp+-0.4 deg C
      Dimensions Weight240 x 182 x 74 mm / 1.1 kg
      Environment0 to 50 deg C (32 to 122 deg F); RH max 95%
      Power SupplyIncluded 12 Vdc Adapter
      Auto OffAfter 5 Minutes Of Non-use (Can Be Disabled)
      ProbeMS 87421, 4-ring platinum, internal temperature sensor

      Multi-ranging Conductivity, TDS, NaCl, Temperature Meter with 4-ring Potentiometric Conductivity Probe with Platinum Sensors - ATN 3411

      Features:

      • Auto-ranging
      • 4-ring potentiometric conductivity probe with internal temperature sensor
      • Automatic (ATC), Manual (MTC) or No Temperature Compensation (NoTC)
      • Good Laboratory Practice
      • PC compatible

      Overview:

      • ATN 3411 measures Conductivity, TDS, NaCl and temperature. In extended conductivity and TDS ranges (up to 500 mS/cm and 400 g/L respectively) the instrument automatically chooses the best scale.
      • This instrument utilizes a 4-ring potentiometric probe with platinum sensors that offers greater versatility over typical amperometric designs. By utilizing the 4-ring method, it is possible to measure very low or high conductivity levels without
      • Changing probes.
      • Calibration is automatic at 1 point with 6 memorized buffers.
      • The meter has 3 options for temperature compensation: ATC between 0 to 60.0 DegreeC, MTC and NoTC.
      • Other features include a read lock function, stability indicator, GLP and PC compatibility via optional ATN 03111 software.

      Yes! I am Interested


      Get Best Quote

      Approx. Rs 2,800 / Piece Get Latest Price

      Product Details:
      Dimensions96 x 96 x 120 mm
      OutputTwo Isolated Relays
      Range0 -14 pH
      Accuracy+-0.01 pH
      Display2 x 16 LCD Multi Parameter Display Backlit
      CalibrationThree Point Keypad
      Retransmission OutputIsolated 4 - 20 mA
      Temperature CompensationAuto / Man Selectable (PT-100)
      Repeatability+- 1 LSB
      Power Supply220-240 VAC, 50/60 Hz
      EnclosureABS
      MountingPanel Mounted

      Feature:
      • Advanced Embedded Microcontroller based design
      • Easy front key calibration
      • Multi parameter display Simultaneously shows - pH, Temp, mV & Relay Status on Single screen
      • Two Programmable isolated relay outputs
      • Isolated 4 to 20 mA retransmission output
      • Sensor Slope displaydicating Controller Cum Transmitter ATN pH 27

      Yes! I am Interested


      Get Best Quote

      Approx. Rs 2,500 / Piece Get Latest Price

      Product Details:
      OutputTwo Isolated Relays
      Range0 -14 pH
      Accuracy+-0.01pH
      DisplayLCD Multivariable Display Backlit
      CalibrationThree Point Keypad
      Retransmission OutputIsolated 4 - 20 mA (Optional)
      Temperature CompensationAuto / Man Selectable (PT-100)
      Repeatability+- 1 LSB
      Power Supply220-240 VAC, 50/60 Hz
      EnclosureABS
      MountingIP 65 Field Mounted

      pH Indicating Controller cum Transmitter ATN pH 27 W
      Feature:
      • Advanced Embedded Microcontroller based design
      • Field Type Weather proof version
      • Easy front key calibration
      • Multi parameter display Simultaneously shows - pH, Temp, mV & Relay Status on Single screen
      • Two Programmable isolated relay outputs
      • Isolated 4 to 20 mA retransmission output

      Yes! I am Interested


      Get Best Quote

      Approx. Rs 1,800 / Piece Get Latest Price

      Product Details:
      Range0.00 to 14.00 pH
      InputpH Combination Sensor with BNC Connector Female
      Accuracy+-0.05 pH
      Calibration2 points Manual ( 4.00 & 7.00 pH Buffers)
      Output4 to 20 mA DC Isolated
      Load600 Ohm
      MountingWall Mounted
      EnclosureABS Weatherproof IP 65
      Dimensions80 x 120 x 55 mm
      GlandsPVC PG 9 - 02 Nos.
      Power240 VAC

      pH Transmitters - ATN pH 27 B:These reliable transmitters provide a simple solution for monitoring or as part of an advanced control solution. The ATN pH transmitter offers a simple yet effective solution to your fluid monitoring needs and can also be used as a component within a more advanced system.

      Yes! I am Interested


      Get Best Quote

      Approx. Rs 1,300 / Piece Get Latest Price

      Product Details:
      MakeATN
      ModelMS ORP 01
      TypeCombination
      Range+- 2000 mV
      Temp Range0 to 60 deg C
      Ref TypeDouble Junction AgCl
      Junction TypeCeramic
      Diameter12 mm
      Overall Length85mm
      BodyEpoxy
      Pressure5 Bar
      Process Connection1/2" & 3/4" BSP

      ORP Sensors With Platinum Tip ATN - ORP 01

      Yes! I am Interested


      Get Best Quote

      Approx. Rs 2,000 / Piece Get Latest Price

      Product Details:
      Pressure5 Bar
      BodyEpoxy with Glass Bulb
      Cable Length5 Meter with BNC Connector
      JunctionDouble Junction Ceramic
      MountingPipeline Mounting
      Process Connection1/2" & 3/4" BSP Male
      Temperature0~80 deg C
      Range0~14 pH
      TypeCombination
      Sensor OutputmV

      Industrial PH Sensors - ATN PH 01

      Yes! I am Interested


      Get Best Quote

      Approx. Rs 2,500 / Piece Get Latest Price

      Product Details:
      Pressure6 Bar
      BodyCPVC
      Cable Length5 Meter with BNC Connector
      JunctionDouble Junction Ceramic
      MountingImmersion Or In-line Mounting
      Process Connection3/4" BSP Male
      Temperature0~80 deg C
      Range0 to 14pH
      TypeCombination
      Sensor OutputmV (+- 59.4 mV/pH change at 25 deg C)
      Temp CompensationPt 100

      Industrial pH Sensors - ATN pH 02

      Yes! I am Interested


      Get Best Quote

      Approx. Rs 3,500 / Piece Get Latest Price

      Product Details:
      BodyGlass
      JunctionCeramic Double Junction
      Process ConnectionPG 13.5
      Range0-14 pH
      Ref TypeAg/Agcl
      Max Operating Temp0 to 130 deg C
      Max Operating Pressure100 PSI
      Insertion Length120 mm ( Specify while Ordering)
      Diameter12 mm
      Electrical ConnectionS7
      Interconnecting CableOptional

      Industrial pH Sensors - Autoclavable / Sterilizable ATN pH 04

      Yes! I am Interested


      Ask for Price

      Price on Request: Get Latest Price

      Product Details:
      BodySS 316
      MOC of ElectrodePlatinum / Glass
      Cell Constant0.1 / 1.0
      Operating Temperature100 deg C
      Mac Operating Pressure5 Bar
      Temp CompensationPt-100 (Optional)
      Process Connection1/2" & 3/4" BSP Male
      Cable5 Meters

      Specification
      Body:SS 316
      MOC of Electrode:Platinum / Glass
      Cell Constant:0.1 / 1.0
      Operating Temperature:100°C
      Mac Operating Pressure:5 Bar
      Temp. Compensation:Pt-100 ( Optional)
      Process Connection:½” & ¾” BSP Male
      Cable:5 Meters

      Yes! I am Interested


      Ask for Price

      Price on Request: Get Latest Price

      Product Details:
      BodyCPVC
      MOC of ElectrodePlatinum / Glass
      Cell Constant0.1 / 1.0
      Operating Temperature80 deg C
      Mac Operating Pressure5 Bar
      Temp CompensationPt-100 ( Optional)
      Process Connection1/2" & 3/4" BSP Male
      Cable5 Meters

      Specification
      Body:CPVC
      MOC of Electrode:Platinum / Glass
      Cell Constant:0.1 / 1.0
      Operating Temperature:80°C
      Mac Operating Pressure:5 Bar
      Temp. Compensation:Pt-100 ( Optional)
      Process Connection:½” & ¾” BSP Male
      Cable:5 Meters

      Yes! I am Interested


       






      Corporate Brochure




       

       

      Send SMS
      Ajith Kumar Nimbalkar  (Proprietor)
      Sai Enterprises
      No. 107, 2nd Main, MEI Colony, Laggere Main Road, Peenya Industrial Area
      Bengaluru - 560058 , Karnataka , India
      Send E-mail
      Share Us:
      X