Sai Enterprises
Sai Enterprises
Peenya, Bengaluru, Karnataka
Send E-mail
Send SMS
Home  » Our Products  » 

WATER TRETMENT


Wholesale Trader of a wide range of products which include iro controller panel 33m, iro with gsm, tds conductivity meter, water atm: smart card, water atm : coin type and iro controller panel 11mm.

REQUEST CALLBACK
Get Best Quote

Approx. Rs 3,800 / Piece Get Latest Price

Product Details:
MountingPanel Mounting.
Supply Voltage415VAC +- 10% 50Hz. , 3 Phase, 4 Wire.
Current Range0-30 A
Voltage0.25% +- 1 digits.
Current0.25% rdg +- 1 digits.
Voltage Resolution Dispaly1 V
Current Resolution Display0.1 A
Working Temp0 to 55 deg C
Storage Temp-5 to 70 deg C
Relative Humidity0 - 95 % Non-Condensing
Warm up Time10 Sec
Dimensions165 (W) X 60 (L) X 115 (H). Cutout 157 (W) x 109 (H).

Automation Philosophy:
The Industrial RO control panel provides for very convenient mounting and easy field cable terminations. Removable terminals blocks are provided for easy terminations. Different sizes of terminals are selected for process and power connections to avoid wrong connections. The industrial RO control panel is based on state of the art technology processor. It has 6 digital inputs and four outputs. It also has Conductivity and Flow (pulse type) Sensor inputs. It can be set for Manual pre-treatment operation or Automatic pre-treatment operation. On powering the controller it checks for Raw Water Tank (RWT) level and the Treated Water Tank (TWT) level. On receiving signals that the RWT is not empty and TWT is not full, it starts up the Raw water Pump (RWP). A Low Pressure Switch (LPS) check the pressure developed at the suction of HPP. On receiving the signal that pressure is developed (LPS) at the suction of High Pressure Pump (HPP), it opens the Flush (reject) Solenoid valve for a settable time, ensuring slow flush. After this, the HPP is started for a settable time ensuring fast flush. At the end of this time Flush Solenoid valve is closed and RO is started/operational. The controller continuously checks the pressure (LPS) at the HPP suction. Should it fall, a message is displayed with an LED indication on the front panel. After a settable delay if this condition prevails, the RO is shut with a message on the LCD screen. The system can be restarted only with activation of the Start key or Power reset. If during RO in operation; - RWT empty signal is received, both the pumps stop immediately with a message on the LCD, and an LED indication for RWP level. RO can be restarted on activating Start key or Power reset. - TWT full signal is received, a flush sequence is carried out and then both the pumps stop with a message on the LCD screen and an LED indication. Once TWT full signal goes off, Slow and Fast flush sequence is initiated and RO starts. - High Pressure switch (HPS) activation is received, both the pumps stop immediately with a message on the LCD, and an LED indication for HPS. RO can be restarted on activating Start key or Power reset. - Conductivity value exceeds set High level, a message is displayed till the time value is between High and Very High Limits set. If the Conductivity value exceeds the Very High limit set, both the pumps stop immediately with a message on the LCD. RO can be restarted on activating Start key or Power reset. - Any electrical faults at RWP and / or HPP 
SPECIFICATION
  • Supply voltage : 415VAC ± 10% 50Hz. , 3 Phase, 4 Wire.
  • Current range :0-30 A
  • Display Accuracy:Voltage : 0.25% ± 1 digits.
    Current : 0.25% rdg ± 1 digits.
    Voltage Resolution (Dispaly) : 1 V
    Current Resolution (Display) : 0.1 A 
  • Environmental:
    1. Working Temp : 0 to 55º C
    2. Storage Temp : -5 to 70º C
    3. Relative humidity : 0 – 95 % Non-Condensing
    4. Warm up time : 10 Sec
  • Enclosure:
    1. Mounting : Panel mounting.
    2. Dimensions : 165 (W) X 60 (L) X 115 (H).
    Cutout 157 (W) x 109 (H).
    All dimensions are in mm.

  • Yes! I am Interested


    REQUEST CALLBACK
    Get Best Quote

    Approx. Rs 3,800 / Piece Get Latest Price

    Product Details:
    MountingPanel Mounting.
    Input Voltage230VAC, 50Hz
    Output Current10
    ResolutionCurrent: - 0.1 A
    Working Temp0 to 55 deg C
    Storage Temp10 to 70 deg C
    Relative Humidity0 - 95 % Non-Condensin
    Warm up Time10 Sec
    Dimensions165 (W) X 60 (L) X 115 (H). Cutout 157 (W) x 109 (H).
    Cutout DimensionsCurrent Calibration (Offset) Can Be Done At Site
    Field CalibrationField CalibrationCurrent Calibration (Offset) Can Be Done At Site

    Automation Philosophy:
    The Industrial RO control panel provides for very convenient mounting and easy field cable terminations. Removable terminals blocks are provided for easy terminations. Different sizes of terminals are selected for process and power connections to avoid wrong connections. The industrial RO control panel is based on state of the art technology processor. It has 6 digital inputs and four outputs. It also has Conductivity and Flow (pulse type) Sensor inputs. It can be set for Manual pre-treatment operation or Automatic pre-treatment operation. On powering the controller it checks for Raw Water Tank (RWT) level and the Treated Water Tank (TWT) level. On receiving signals that the RWT is not empty and TWT is not full, it starts up the Raw water Pump (RWP). A Low Pressure Switch (LPS) check the pressure developed at the suction of HPP. On receiving the signal that pressure is developed (LPS) at the suction of High Pressure Pump (HPP), it opens the Flush (reject) Solenoid valve for a settable time, ensuring slow flush. After this, the HPP is started for a settable time ensuring fast flush. At the end of this time Flush Solenoid valve is closed and RO is started/operational. The controller continuously checks the pressure (LPS) at the HPP suction. Should it fall, a message is displayed with an LED indication on the front panel. After a settable delay if this condition prevails, the RO is shut with a message on the LCD screen. The system can be restarted only with activation of the Start key or Power reset. If during RO in operation; - RWT empty signal is received, both the pumps stop immediately with a message on the LCD, and an LED indication for RWP level. RO can be restarted on activating Start key or Power reset. - TWT full signal is received, a flush sequence is carried out and then both the pumps stop with a message on the LCD screen and an LED indication. Once TWT full signal goes off, Slow and Fast flush sequence is initiated and RO starts. - High Pressure switch (HPS) activation is received, both the pumps stop immediately with a message on the LCD, and an LED indication for HPS. RO can be restarted on activating Start key or Power reset. - Conductivity value exceeds set High level, a message is displayed till the time value is between High and Very High Limits set. If the Conductivity value exceeds the Very High limit set, both the pumps stop immediately with a message on the LCD. RO 
    SPECIFICATION
  • Input voltage: 230VAC, 50Hz
  • Output current:10 A.
  • Resolution:Current: - 0.1 A
  • Environmental:
    1. Working Temp : 0 to 55º C
    2. Storage Temp : 10 to 70º C
    3. Relative humidity : 0 – 95 % Non-Condensing
    4. Warm up time : 10 Sec
  • Enclosure:
    1. Mounting : Panel mounting.
    2. Dimensions : 165 (W) X 60 (L) X 115 (H).
    Cutout 157 (W) x 109 (H).
    All dimensions are in mm.
  • Field Calibration: Current Calibration (Offset) can be done at site
  • Cutout Dimensions: Current Calibration (Offset) can be done at site
  • Field Calibration:Current Calibration (Offset) can be done at site
  • Field Calibration:Current Calibration (Offset) can be done at site

  • Yes! I am Interested


    REQUEST CALLBACK
    Get Best Quote

    Approx. Rs 4,000 / Piece Get Latest Price

    Product Details:
    TDS Conductivity Range0-2000ppm
    Resolution0.1ppm
    Auxiliary Power90 to 270V AC, 50 HZ
    Relay Contact Ratings10A/230V
    MountingMounting
    PositionPanel
    Enclosure96(W)X96(L)X53(D)mm..
    Cut Out92(L)mm X 92(W)mm
    TerminalScrew ON Terminals.
    Supply Voltage230VAC +- 10% 50Hz.

    Technical Specifications:
    KEYS1. SET : This key is used to change the controller from RUN mode to FUNCTION mode for parameter setting
    2. INC : Up scroll the parameter parameter value.
    3. DEC: Down scroll the parameter parameter value.
    LED INDICATIONS1. Relay ON :Green LED
    Glow- Relay ON
    Not Glowing- Relay OFF
    2. TDS :Red LED
    Glow- TDS Selected
    Not Glowing- TDS not Selected
    3. Conductivity :Red LED

    Yes! I am Interested


    REQUEST CALLBACK
    Get Best Quote

    Approx. Rs 13,500 / Piece Get Latest Price

    Product Details:
    Flow SensorPulse Type
    Water Inlet Connection3/4" Solvent Cementable
    Level SensingTreated Water Level Floaty
    Supply Voltage90-270 VAC / DC.
    Display2.8" TFT (Monochrome)
    Programming Keys5
    Water Outlet Connection3/4" Solvent Cementable.
    Water Column1 m (min)
    Working Temp0 to 55 deg C
    Storage Temp-5 to 70 deg C
    Relative Humidity0 - 95 %
    Warm up Time10 Sec

    System Description:
    The system comprises of state of the art technology, IP65 panel mounted Water ATM controller, internally mounted Flow Sensor, a 12 VDC (230VAC optional)solenoid valve and suitable piping with convenient external inlet and outlet connections. Water ATM controller has a 2.8 inch LCD display along with 5 nos. of programming keys. This facilitates selection and navigation through the menu driven setting options. The controller also features built in RFID reader/writer, Real Time Clock, Pulse type Flow Sensor interface, control output for Solenoid Valve. 
    Automation Philosophy:
    The Proton Automatic Dispenser, delivers water to an individual by his placing the RFID card (Smart Card) on the Proton ATM Controller on the dispenser panel. Controller opens the solenoid valve to dispense a set batch of water Automatic Dispensing Machine provides for initialising a set of RFID cards and then charging them with an amount to be spent for getting a predefined batches of water. An RFID card can be initialised from the Proton Water ATM controller. A set of RFID cards can be initialised so that they are recognised by a particular set of Proton ATM Controllers only. Thus avoiding inter vendor usage. An individual card then can be charged with an amount in Rupees through the Proton ATM controller. On receiving a batch of water from the Dispenser, an amount set per batch is deducted from the RFID card, as soon as it is presented to the controller. The controller notifies if the water level in the feed tank is low or if the charge left in the card is inadequate. The controller has an auto calibration function, where a unit batch (1 litre) can be calibrated with the help of known capacity containers of 1, 2 ,5 , 10 or 20 litres. Controller stores the data of amount of water dispensed and total charges made, date wise for a period of month.
    SPECIFICATION
  • Supply voltage : 90-270 VAC / DC.
  • Solenoid :12VDC / 230VAC (Internal or External)
  • Flow Sensor:Pulse Type
  • Level Sensing: Treated Water Level Floaty
  • Display: 2.8" TFT (Monochrome)
  • Programming Keys: 5 
  • Water Inlet Connection: 3⁄4” Solvent Cementable 
  • Water Outlet Connection: 3⁄4” Solvent Cementable.
  • Water Column : 1 m (min)
  • Environmental:
    1. Working Temp : 0 to 55º C
    2. Storage Temp : -5 to 70º C
    3. Relative humidity : 0 – 95 % Non-Condensing
    4. Warm up time : 10 Sec
  • Enclosure:
    1. Mounting : Wall mounting.
    2. Dimensions : 250 (W) X 300(H) X 150 (D) mm.
    All dimensions are in mm.

  • Yes! I am Interested


    REQUEST CALLBACK
    Get Best Quote

    Approx. Rs 13,500 / Piece Get Latest Price

    Product Details:
    Flow SensorPulse Type
    Water Inlet Connection3/4" Solvent Cementable
    Level SensingTreated Water Level Floaty
    Supply Voltage90-270 VAC / DC.
    Solenoid12VDC / 230VAC (Internal or External)
    Display2.8" TFT (Monochrome)
    Programming Keys5
    Water Column1 m (min)
    Working Temp0 to 55 deg C
    Storage Temp-5 to 70 deg C
    Relative Humidity0 - 95 % Non-Condensing
    Warm up Time10 Sec
    MountingWall mounting.
    Dimensions300 (W) X 350(H) X 190 (D) mm

    System Description:
    The system comprises of state of the art technology, IP65 panel mounted Water ATM controller, internally mounted Flow Sensor, a 12 VDC (230VAC optional)solenoid valve and suitable piping with convenient external inlet and outlet connections. Water ATM controller has a 2.8 inch LCD display along with 5 nos. of programming keys. This facilitates selection and navigation through the menu driven setting options. The controller also features built in RFID reader/writer, Real Time Clock, Pulse type Flow Sensor interface, control output for Solenoid Valve. 
    SPECIFICATION
  • Supply voltage : 90-270 VAC / DC.
  • Solenoid :12VDC / 230VAC (Internal or External)
  • Flow Sensor:Pulse Type
  • Level Sensing: Treated Water Level Floaty
  • Display: 2.8" TFT (Monochrome)
  • Programming Keys: 5 
  • Water Inlet Connection: 3⁄4” Solvent Cementable 
  • Water Outlet Connection: 3⁄4” Solvent Cementable.
  • Water Column : 1 m (min)
  • Environmental:
    1. Working Temp : 0 to 55º C
    2. Storage Temp : -5 to 70º C
    3. Relative humidity : 0 – 95 % Non-Condensing
    4. Warm up time : 10 Sec
  • Enclosure:
    1. Mounting : Wall mounting.
    2. Dimensions : 300 (W) X 350(H) X 190 (D) mm.
    All dimensions are in mm.

  • Yes! I am Interested


    REQUEST CALLBACK
    Ask for Price

    Price on Request: Get Latest Price

    Product Details:
    Supply Voltage415VAC +- 10% 50Hz. , 3 Phase, 4 Wire.
    Current Range0-30 A
    Voltage0.25% +- 1 digits
    Current0.25% rdg +- 1 digits
    Voltage Resolution Dispaly1 V
    Current Resolution Display0.1 A
    Working Temp0 to 55 deg C
    Storage Temp10 to 70 deg C
    Relative Humidity0 - 95 % Non-Condensing
    Warm up Time10 Sec

    Automation Philosophy:
    The Industrial RO control panel provides for very convenient mounting and easy field cable terminations. Removable terminals blocks are provided for easy terminations. Different sizes of terminals are selected for process and power connections to avoid wrong connections. The industrial RO control panel is based on state of the art technology processor. It has 6 digital inputs and four outputs. It also has Conductivity and Flow (pulse type) Sensor inputs. It can be set for Manual pre-treatment operation or Automatic pre-treatment operation. On powering the controller it checks for Raw Water Tank (RWT) level and the Treated Water Tank (TWT) level. On receiving signals that the RWT is not empty and TWT is not full, it starts up the Raw water Pump (RWP). A Low Pressure Switch (LPS) check the pressure developed at the suction of HPP. On receiving the signal that pressure is developed (LPS) at the suction of High Pressure Pump (HPP), it opens the Flush (reject) Solenoid valve for a settable time, ensuring slow flush. After this, the HPP is started for a settable time ensuring fast flush. At the end of this time Flush Solenoid valve is closed and RO is started/operational. The controller continuously checks the pressure (LPS) at the HPP suction. Should it fall, a message is displayed with an LED indication on the front panel. After a settable delay if this condition prevails, the RO is shut with a message on the LCD screen. The system can be restarted only with activation of the Start key or Power reset. If during RO in operation; - RWT empty signal is received, both the pumps stop immediately with a message on the LCD, and an LED indication for RWP level. RO can be restarted on activating Start key or Power reset. - TWT full signal is received, a flush sequence is carried out and then both the pumps stop with a message on the LCD screen and an LED indication. Once TWT full signal goes off, Slow and Fast flush sequence is initiated and RO starts. - High Pressure switch (HPS) activation is received, both the pumps stop immediately with a message on the LCD, and an LED indication for HPS. RO can be restarted on activating Start key or Power reset. - Conductivity value exceeds set High level, a message is displayed till the time value is between High and Very High Limits set. If the Conductivity value exceeds the Very High limit set, both the pumps stop immediately with a message on the LCD. RO can be restarted on activating Start key or Power reset. - Any electrical faults at RWP and / or HPP such as Overload, Dry Run, Over Voltage, Under Voltage the RO stops after the set trip value
    SPECIFICATION
  • Supply voltage : 415VAC ± 10% 50Hz. , 3 Phase, 4 Wire.
  • Current range :0-30 A
  • Display Accuracy:Voltage : 0.25% ± 1 digits.
    Current : 0.25% rdg ± 1 digits.
    Voltage Resolution (Dispaly) : 1 V
    Current Resolution (Display) : 0.1 A 
  • Environmental:
    1. Working Temp : 0 to 55º C
    2. Storage Temp : 10 to 70º C
    3. Relative humidity : 0 – 95 % Non-Condensing
    4. Warm up time : 10 Sec
  • Enclosure:
    1. Mounting : Panel mounting.
    2. Dimensions : 165 (W) X 60 (L) X 115 (H).
    Cutout 157 (W) x 109 (H).
    All dimensions are in mm.

  • Yes! I am Interested


    REQUEST CALLBACK
    Ask for Price

    Price on Request: Get Latest Price

    Product Details:
    Supply Voltage415VAC +- 10% 50Hz. , 3 Phase, 4 Wire.
    Voltage0.25% +- 1 digits. Current : 0.25% rdg +- 1 digits.
    Voltage Resolution Dispaly1 V
    Current Resolution Display0.1 A
    Working Temp0 to 55 deg C
    Storage Temp10 to 70 deg C
    Relative Humidity0 - 95 % Non-Condensing
    Warm up Time10 Sec
    MountingPanel Mounting.
    Dimensions165 (W) X 60 (L) X 115 (H). Cutout 157 (W) x 109 (H)

    Automation Philosophy:
    The Industrial RO control panel provides for very convenient mounting and easy field cable terminations. Removable terminals blocks are provided for easy terminations. Different sizes of terminals are selected for process and power connections to avoid wrong connections. The industrial RO control panel is based on state of the art technology processor. It has 6 digital inputs and four outputs. It also has Conductivity and Flow (pulse type) Sensor inputs. It can be set for Manual pre-treatment operation or Automatic pre-treatment operation. On powering the controller it checks for Raw Water Tank (RWT) level and the Treated Water Tank (TWT) level. On receiving signals that the RWT is not empty and TWT is not full, it starts up the Raw water Pump (RWP). A Low Pressure Switch (LPS) check the pressure developed at the suction of HPP. On receiving the signal that pressure is developed (LPS) at the suction of High Pressure Pump (HPP), it opens the Flush (reject) Solenoid valve for a settable time, ensuring slow flush. After this, the HPP is started for a settable time ensuring fast flush. At the end of this time Flush Solenoid valve is closed and RO is started/operational. The controller continuously checks the pressure (LPS) at the HPP suction. Should it fall, a message is displayed with an LED indication on the front panel. After a settable delay if this condition prevails, the RO is shut with a message on the LCD screen. The system can be restarted only with activation of the Start key or Power reset. If during RO in operation; - RWT empty signal is received, both the pumps stop immediately with a message on the LCD, and an LED indication for RWP level. RO can be restarted on activating Start key or Power reset. - TWT full signal is received, a flush sequence is carried out and then both the pumps stop with a message on the LCD screen and an LED indication. Once TWT full signal goes off, Slow and Fast flush sequence is initiated and RO starts. - High Pressure switch (HPS) activation is received, both the pumps stop immediately with a message on the LCD, and an LED indication for HPS. RO can be restarted on activating Start key or Power reset. - Conductivity value exceeds set High level, a message is displayed till the time value is between High and Very High Limits set. If the Conductivity value exceeds the Very High limit set, both the pumps stop immediately with a message on the LCD. RO can be restarted on activating Start key or Power reset. - Any electrical faults at RWP and / or HPP such as Overload, Dry Run, Over Voltage, Under Voltage the RO stops after the set trip values
    SPECIFICATION
  • Supply voltage : 415VAC ± 10% 50Hz. , 3 Phase, 4 Wire.
  • Current range :as requested by the customer
  • Display Accuracy:Voltage : 0.25% ± 1 digits.
    Current : 0.25% rdg ± 1 digits.
    Voltage Resolution (Dispaly) : 1 V
    Current Resolution (Display) : 0.1 A 
  • Environmental:
    1. Working Temp : 0 to 55º C
    2. Storage Temp : 10 to 70º C
    3. Relative humidity : 0 – 95 % Non-Condensing
    4. Warm up time : 10 Sec
  • Enclosure:
    1. Mounting : Panel mounting.
    2. Dimensions : 165 (W) X 60 (L) X 115 (H).
    Cutout 157 (W) x 109 (H).
    All dimensions are in mm.

  • Yes! I am Interested


    REQUEST CALLBACK
    Get Best Quote

    Approx. Rs 4,000 / Piece Get Latest Price

    Product Details:
    Nominal Input Current15 A
    Auxillary Input Supply415VAC +/- 10%, 50Hz, 3-Phase, 4- wire. Display: Current, Fault Messages.
    Display AccuracyCurrent : 0.25% rdg +- 1 digits.
    ResolutionCurrent: 0.1 A

    Technical Specifications
    Environmental1] Working Temp 0 to 55 C
    2] Storage Temp 10 to 70 C
    3] Relative humidity 0 - 95% non-condensing
    4] Warm up time 10 Sec
    Enclosure1] Mounting Wall mounting.
    2] Enclosure 190 (W) X 130 (L) X 70 (H) mm.
    3] Terminal Screw ON Terminals.

    Yes! I am Interested


    Get Best Quote

    Approx. Rs 4,000 / Piece Get Latest Price

    Product Details:
    Supply Voltage230 VAC +- 15 %.
    Output Contact Rating30A,250V for Compressor.7Amps,at 250 VAC for FAN1/FAN2.
    Front Panel1) 3 seven Segment bright LED Display. 2) 3 Keys for settings. 3) Fault indication by Red LED.
    Sensing1) Temperature, HP, LP for compressor. 2) Current Voltage sensing.

    1.Under normal working condition at power on after delay of 1 min.FAN1 will Start (ON),after 2 mins.FAN2 Starts(ON),after 3 min delay Compressor will Starts(ON). 2.While compressor is ON,if HP,LP,OL occurs then Compressor and FAN2 will be Shut Down(OFF). 3.IF UV /OV occurs then Both FANs and compressor will be Shut Down(OFF).
    SPECIFICATION
  • Supply Voltage: 230 VAC ± 15 %.
  • Output Contact Rating:
  • 30A,250V for Compressor.
  • 7Amps,at 250 VAC for FAN1/FAN2.
  • Front Panel:
  • 1) 3 seven Segment bright LED Display.
  • 2) 3 Keys for settings.
  • 3) Fault indication by Red LED.
  • 4) Compressor,FAN1/2 Green LED.
  • Sensing:
  • 1) Temperature, HP, LP for compressor.
  • 2) Current & Voltage sensing.

  • Yes! I am Interested


    Get Best Quote

    Approx. Rs 3,800 / Piece Get Latest Price

    Product Details:
    Input Supply3 Phase 415 V, 50 HZ AC (3 Phase 3 wire)
    Output Contact Rating30A,250V for Compressor.7Amps,at 250 VAC for FAN1/FAN2.
    Front Panel1) 4 seven Segment bright LED Display. 2) 3 Keys for settings. 3) Fault indication by Red LED.
    Sensing1) Temperature, HP, LP and Flow for compressor. 2) Current, Voltage temp sensing.

    1.Under normal working condition at power on after setteble ON delay Pump & Compressor will Start
    2.While compressor is ON,if HP,LP,Flow Fault occurs then Cmpressor will shut down(OFF).
    3.IF UV /OV,UL/OL occurs then Both Pump and compressor will shut down(OFF)
    4.If unit in Chiller mode then If temp.goes above setpoint compressor will Start & vice versa.
    If unit in a Heat Pump mode then If temp.goes below setpoint compressor will start & vice versa.
    SPECIFICATION
  • Technical Specifications:
  • Input Supply: 3 Phase 415 V, 50 HZ AC (3 Phase 3 wire)
  • Output Contact Rating: 30A,250V for Compressor.
  • 7Amps,at 250 VAC for FAN1/FAN2.
  • Front Panel:
  • 1) 4 seven Segment bright LED Display.
  • 2) 3 Keys for settings.
  • 3) Fault indication by Red LED.
  • 4) Pump and Compressor Status by
  • Green LED
  • Sensing:
  • 1) Temperature, HP, LP and Flow for
  • compressor.
  • 2) Current, Voltage & temp sensing.


  • Additional Information:
    • Pay Mode Terms: T/T (Bank Transfer)

    Yes! I am Interested


     






    Corporate Brochure




     

     

    Send SMS
    Sai Enterprises
    Ajith Kumar Nimbalkar  (Proprietor)
    No. 107, 2nd Main, MEI Colony, Laggere Main Road, Peenya Industrial Area
    Bengaluru - 560058 , Karnataka , India
    Send E-mail
    Share Us:
    X